RTPFR: Generic Requirements for the Signaling System 7 (SS7) Release to Pivot (RTP) Phase II Network Capability
Document Number GR-3015
Issue Number 02
Issue Date Aug 2001
ABSTRACT: Issue 2 of GR-3015, RTPFR: Generic Requirements for the Signaling system 7 (SS7) Release to Pivot (RTP) Phase II Network Capability,
replaces Issue 1.
This document contains the Telcordia view of proposed generic requirements for the use of the Integrated Services Digital Network
User Part (ISUP) of Signaling System No. 7 (SS7) by a Stored Program Controlled Switching System (SPCS) to support the Release to Pivot
(RTP) network capability. For simplicity, the SPCS is referred to as a switch throughout this document. This document defines the
second phase of RTP, known as RTP Phase II. GR-2857 defines RTP Phase I. GR-3015 augments the GR-2857 generic requirements.
The RTP network capability permits an RTP switch that has received a call from another RTP switch, and has determined the call
should be connected to a destination switching system other than itself, to optionally release the call back to the switch earlier in
the call path. Sufficient information is provided in the release to enable the new connection to be established from the earlier
switch. The destination switching system does not have to be RTP- or even SS7-capable, but if the new destination is RTP-capable, in a
future version of RTP, the RTP switch may also set up the new call leg using RTP functionality.
RTP is an optional routing capability that builds on existing SS7 call setup procedures. RTP is a generic network capability that is
invoked in support of service or business needs, and not directly by an end user.
Issue 2 of GR-3015 contains the following changes:
- describes Bearer Independent Call Control (BICC) signaling and the call scenarios in which BICC signaling is used. BICC
signaling is used to establish, process, and release calls over an Asynchronous Transfer Mode (ATM) or Internet Protocol (IP) backbone
- references the BICC generic requirements in GR-3100 for call scenarios in which BICC signaling is used, rather than ISUP
- refers to logical traffic groups, rather than physical trunk groups, whenever BICC signaling is used.
- refers to Serving Nodes (SNs), rather than switches whenever BICC signaling is used.
When using GR-3015, you may need to refer to GR-3100, GR-690, GR-1144, and/or GR-1277. You may also want to refer
to GR-478, GR-1298, GR-2974, and GR-3016.
Components of this product are:
Table of Contents:
View Table of Contents
We can accept credit cards, Wire Transfers, or Purchase Orders. For PDF, EMAIL, or DOWNLOAD media, you must complete your purchase online by credit card, or by calling Customer Service. If you have additional payment questions or we can assist in any way, please contact Customer Service. You can also go to our Ordering/Payment FAQs page for further information. See our Return Policy for details on returns.