ISDN Basic Rate Interface (BRI) E9-1-1 Tandem/End Office to ISDN PSAP Interface
Document Number GR-2967
Issue Number 03
Issue Date Dec 2000
Components of this product are:
ABSTRACT: Issue 3 of GR-2967, ISDN Basic Rate Interface (BRI): E9-1-1 Tandem/End Office to ISDN PSAP Interface, replaces Issue 2.
Current wireline and wireless telecommunications industry growth, along with increasing demands on E9-1-1 service, have pushed the
analog signaling protocol and some E9-1-1 tandem capabilities to their limits. Support for using the full 10 digits of the calling
station's number at the E9-1-1 tandem and on the E9-1-1 tandem to the Public Safety Answering Point (PSAP) interface is required in
order for E9-1-1 service to continue to work effectively. This requirement and other needs created by industry factors are the focus of
this generic requirements document. One approach is to expand the existing MF interface between the E9-1-1 tandem and PSAP to
accommodate these needs, as described in GR-2953.
This GR provides requirements for providing equivalent functionality via an ISDN BRI interface to the PSAP. GR-2967 also provides
generic requirements to support an Advanced Intelligent Network (AIN) based E9-1-1 service architecture for an End office serving an
ISDN PSAP. Using an AIN based architecture, it is possible to move the selective routing functionality, and access to the customer data
that currently resides in the Automatic Location Identification (ALI) database, to a single network database or service Control Point
(SCP). This SCP could be queried by an end office or tandem switch that supports Service Switching Point (SSP) functionality to obtain
routing information for a E9-1-1 call. An AIN-based architecture could also be used to support enhancements to existing E9-1-1
functionality brought about by a changing regulatory environment.
Several major industry factors that require the enhancement of the E9-1-1 signaling interface between the E9-1-1 tandem and the PSAP
are described briefly. Generic requirements for the interface to the PSAP are provided, including interaction of the PSAP's Customer
Premises Equipment (CPE) with the E9-1-1 tandem as a network element, and some interworking of signaling. Please refer to GR-2953,
and GR-2956 for the generic requirements that define the interfaces necessary for E9-1-1 calls arriving at the E9-1-1 tandem from
various signaling and architectural alternatives, additional signaling interworking requirements, and the selective routing
functionality of the E9-1-1 tandem.
This document also addresses generic requirements for an end office serving a PSAP in an AIN-based architecture to support an ISDN
BRI PSAP in providing E9-1-1 Service. These requirements are intended to propose a mechanism for using intelligent network concepts and
functionality to support current and future E9-1-1 service needs and capabilities. Please refer to GR-2956 for the generic requirements
that define the interfaces necessary for E9-1-1 calls arriving over SS7 trunks at the end office, and GR-3017 for generic
requirements describing the signaling and procedures necessary to support AIN implementations.
Issue 3 of GR-2967 includes generic requirements to support an end office serving an ISDN PSAP in an AIN based E9-1-1 service
architecture. This GR also includes changes to separate the determination of Calling Station Number for selective routing purposes
(when explicit location information is not available), from the determination of what Calling Party information should be delivered to
Additional minor changes have been included to make this document more consistent with GR-2956, and also to separate the
requirements for Selective and Fixed Transfer transfer codes from the feature processing for speed dialing that may also be used by
This GR also includes one or more Issue List Reports (ILRs) that details open or closed technical issues in the main document. The
ILR(s) are automatically sent free of charge to the GR document purchaser.
Table of Contents:
View Table of Contents